Mastodon Power plant and calculations: Electrical & Instrumentation
Showing posts with label Electrical & Instrumentation. Show all posts
Showing posts with label Electrical & Instrumentation. Show all posts

10-Difference between fixed nozzle and Variable nozzle de-super heating

  

 De-superheating is the process of reducing the temperature of superheated steam. This is typically achieved by injecting a cooling medium, such as water, into the steam flow. The nozzles used in the desuperheating process can be classified as either variable nozzle or fixed nozzle de-superheaters. Here's

 The differences between these two types are:

Sl No.

Variable nozzle de-super heater

Fixed nozzle de-super heater

1

Variable nozzle desuperheating systems have adjustable nozzles that allow for controlling the flow rate of the cooling medium injected into the steam flow.

Fixed nozzle desuperheating systems have non-adjustable nozzles, meaning the cooling water flow rate and the degree of desuperheating are fixed

2

The nozzle opening can be adjusted to vary the amount of cooling water injected, thereby controlling the degree of desuperheating and achieving the desired steam temperature.

Separate control valve is required to adjust the water flow

3

More flexibility in adjusting the cooling water flow rate and achieving precise temperature control.

Not much accuracy in temperature control

4

Variable nozzle desuperheating systems are often used in applications that require tight temperature control,

USed where there is much tolerance in temperature control,

Ex: In process industries

They are commonly used in applications where a constant degree of desuperheating is sufficient, such as in industrial processes with steady steam loads or in small-scale power plants.

5

Complex design

Simple design

6

More costlier than fixed nozzle de-super heaters

Less costlier

7

Little bit complicated operation

Simple operation

8

Can be used for variable inlet flow & temperature

Used only for fixed flow & temperature

9

Size of nozzle is variable

Size of nozzle is fixed

10

Maintenance is difficult & costlier

Maintenance is simple & cheaper

 The choice between a variable nozzle and fixed nozzle desuperheater depends on factors such as the required temperature control accuracy, steam flow variability, plant operating conditions, and budget considerations. Variable nozzle desuperheaters are often preferred in applications where precise temperature control and flexibility are crucial, while fixed nozzle desuperheaters can be suitable for applications with relatively stable operating conditions and lower cost requirements.
































11-differences between star connection and delta connections


 






11-differences between start connection and delta connections

Sl No.

Star connection

Delta connection

1

Two types of star connections are possible

A-4-wire, 3-phase system

B-3 wire. 3-phase system

Only 3 wire. 3-phase system is possible

2

Out of 4 wires, 3 wires are the phases and one is neutral

All 3 wires are phases in Delta connection

3

In Star  connection, one end of all the three wires are connected to a common point in the shape of Y to form neutral

In Delta connection every wire is connected to two adjacent wires in the form of triangle.And all the three common points of the connection form the three phases

4

Line current and phase currents are same

Line current and phase current are different.Line current =Phase current

5

Line voltage and phase voltages are different, Line voltage =Phase voltage

Line voltage and phase voltages are same

6

Since line voltage is more than phase voltage, insulation required for each phase is less

In Delta connection line and phase voltages are same hence more insulation is required

7

Star connections are used for both transmission and distribution applications/networks

This connection is generally used for distribution networks

8

Since insulation required is less, these connections are used for longer distances

Since insulation required is more, these connections are used for shorter distances

9

Star  connections are used where less starting current and starting torque is required

Delta connections are used where starting current and Torque is more

10

Power calculation in Start connections.

 

P = 3 X Vp X Ip X Cosθ

 

Or

 

P = (√3 X VL) X IL X Cosθ

Power calculation in Delta connections.

 

P = 3 X Vp X Ip X Cosθ

 

Or

 

P = (√3 X IL) X VL X Cosθ

 

 

11

In star connections different voltage levels are used as line voltage & phase voltages are different

In Delta connections, only single voltage is used



For more articles on power plant and calculations read >>>>power plant and calculations

Questions & Answers on Power Transformers

   

1-What do you mean by power transformer?

It is a static Electro-magnetic machine which transforms alternating current from one AC voltage to another AC voltage at same frequency & at the same apparent power (KVA).

2-What is the principle of Power transformer operation?

Power transformers work on the principle of electromagnetic induction. Which states that, EMF induced in a closed conducting circuit when the magnetic flux linking with that circuit changes in time.

3-What is the main function of a power transformer?

Generally it is used for stepping up or stepping down of Voltage to desired level

4-What are the various parts of power transformer?

General arrangement of Power Transformer


  • Casing
  • Core
  • Primary & secondary windings
  • LV & HV bushings
  • Radiators & cooling system
  • Conservator
  • Breather
  • Protection devices like Buchholz relay, relief valves, temperature sensors

5-Why does the oil conservator is placed at higher elevation?

Oil conservator is placed at a slightly higher level than that of the tank. It accommodates the contraction & expansion of oil level during lower & higher loads respectively. At higher load, oil temperature rises and hence level in the conservator rises & at lower load, oil temperature decreases & level in conservator drops down.

The above cushioning in oil level is by cushioning bag present in conservator, the air cushion in the conservator permits expansion & contraction of the oil tank without contact with moist air.

6-What is the function of breather in Transformers?

Breather is installed in a pipe from conservator. One end is connected to air cushion bag in the conservator, other end is connected to external air.

Breather is filled with dry silica jel, generally pink in colour. When oil in the conservator rises, air is let out through the breather. During low load when oil level in the conservator decreases, air is sucked into the cushion bag through breather. Silica jet absorbs the moisture & lets only dry air. Wet silica jells are blue in color.

7-What is the function of Buchholzs relay?



It is fitted in the pipe between conservator tank & main oil tank. It operates by gas during arcing or short circuits

8-What are the various cooling methods employed in Power transformers?

  • ONAN: Oil Natural & Air Natural
  • ONAF: Oil natural & Air forced
  • OFAF: Oil forced & Air forced
  • OFWF: Oil forced & water forced
  • AN: Air natural

9-What is the function of Pressure relief valve in Transformers?

It is fitted on tank to vent out the gases formed in oil & hence protects the transformer from explosion

10-What do you mean by small, medium & large transformers?

  • Small transformers: < 5 KVA
  • Medium transformers: 5 to 500 KVA
  • Large transformers :> 1 MVA

11-What do you mean by core type transformer?

In this type of transformers, winding surround the limbs of core

12-What do you mean by the Shell type transformer?

In this type of transformers, core surrounds the major portion of the windings

13-What is the relation between voltage, current and number of turns on coils in a transformer?

We have following relation:

Vp/Vs = Np/Ns = Is/Ip

Where, Vp and Vs are Voltage on primary and secondary side.

Np and Ns are No. of turns on primary and secondary coils.

IP and Is are Primary side current and secondary side current of a transformer.

14-A 10 KVA single phase 2200/220 Volts Transformer has 60 turns on secondary side, then calculate Primary current, no. of turns on coil and secondary side current.

Given that,

Vp = 2200 V

Vs 200 V

Ns 60

Transformer rating 10 KVA

We know that Vp/Vs = Np/Ns

Np 60 X 2200/220 = 600 turns

Further, KVA rating of transformer is (Vp Ip)/1000 and (Vs X Is)/1000

10 2200 Ip/1000

Therefore, current on primary side Ip 10 X 1000/2200 = 4.54 Amps

Similarly current on secondary side Is 10 1000/220 45.45 Amps

15-A Power transformer’s input voltage is 11 KV & output voltage is 110 KV,then calculate the number of turns on secondary side, if Primary side winding has 25 turns

We have

V1 / V2 = N1 / N2

11 / 110 = 25 / N2

N2 = 250 Nos

16-A power transformer input voltage is 11 KV & output voltage is 220 KV, then calculate the secondary side current if it has 2300 Amps of current on primary side?

We have

V1 / V2 = I2 / I1

11 / 220 = I2 / 2300

I2 = 115 Amps

17-What are the materials of composition of lamination cores?

Laminations are thin 0.2 to 0.3mm thick silicon sheets. These are further coated by varnish or insulation oxide.

18-Why do the laminations are made up of silicon steel sheets?

Higher the silicon content in steel sheets increases the resistivity & reduces the eddy current losses. But silicon percentage is restricted up to 3.25% max.to avoid brittleness of sheet.

19-What are the various tests carried out on Transformers?

Meggering

  • IR value measurement
  • Magnetic balance test
  • Magnetizing current test
  • Capacitor measurement
  • Ratio test
  • Vector group test
  • Induced voltage test
  • Temperature rise test
  • BDV test
  • No load current test
  • No load loss test

20-What is the significance of magnetizing current test?

  • This test is performed to locate the defects in the magnetic core structure,
  • To detect the shifting of winding, failure
  • To detect the problems in tap changers

21-What are factors which affect IR value of transformer?

  • Surface condition of the terminal bushings
  • Quality of oil
  • Quality of winding insulation
  • Temperature of oil
  • Duration of application & value of test voltage

22-What are the various protections given for power transformers?

  • Differential protection for earth faults
  • High oil temperature & high winding temperature protection
  • Over current protection
  • Over fluxing protection
  • Protection against fire
  • Protection against lightening
  • Buchholz relay for gas & arcing protection
  • Pressure relief valve

23-On what factors transformer loading depends on?

  • Transformer current
  • Winding temperature
  • Oil temperature

24-What are the effects of Transformer over loading?

Overloading results into

  • Cellulose insulation becomes mechanically weak & resulting in winding failure
  • Oil gets rapidly oxidized

25-What is the function of tap changer in Power transformers?

Tap changer is for adjusting the secondary voltage

26-What do you mean by No-load current?

The current flowing through the terminal of a winding when rated voltage is applied at rated frequency the other winding being left open circuited

27-What do you mean by no-load losses in Power transformers?

The active power absorbed when rated voltage at rated frequency is applied to the terminals of one winding, with other winding being left open circuited

28-What parameters of Transformer oil are tested yearly?

Transformer oil qualities are recommended as per IS-335-1963

  • Density
  • Kinematic Viscosity
  • Flash Point
  • Pour point
  • Neutralization Number (Acidity)
  • Sludge
  • Moisture content
  • Dissolved Gas Analysis (DGA)
  • Dielectric Dissipation test
  • Interfacial tension
  • Break down Voltage

29-What is the importance of Transformer BDV test?

BDV test is done to detect moisture, dirt & conductive particles in the oil. The BDV value should be more than 50 KV

30-Briefly explain the BDV test of transformer oil?

This test applies an AC voltage of frequency 40 to 60 Hz through two polished electrodes having diameter 12.5mm to 13 mm with oil gap around 2.5 to 4.0 mm.Rise in voltage between the electrodes is at uniform rate of 2 KV/sec.Thus voltage is increased from zero to till breakdown.

The final value will be arithmetic mean of 6 consecutive tests

 

 

15-Emergencies in power plant operation

Most visited posts