Online Steam Table

 

Superheated Steam Enthalpy Calculator

www.powerplantandcalculations.com

Steam Pressure Pressure Unit kg/cm² Absolute kg/cm² Gauge Superheated Steam Temperature (°C)

Absolute Pressure

Saturation Temperature

Enthalpy of Evaporation (hfg)

Superheated Steam Enthalpy

Superheated Steam Enthalpy

Steam Temperature

Note: The calculator uses the IAPWS-IF97 formulation for superheated steam properties. Enthalpy is calculated from pressure and temperature, rather than using a constant specific heat approximation. The enthalpy of evaporation is calculated from the difference between saturated-vapor and saturated-liquid enthalpies at the entered pressure. For critical engineering/design calculations, verify results against certified steam tables.

Steam Turbine Wheel Chamber Pressure Calculator

Centrifugal fans speed, Static pressure and Power consumption calculator

 

```html

Centrifugal Fan Affinity Laws Calculator

www.powerplantandcalculations.com

Select Value to Calculate Required Air Flow Q₂ Required Static Pressure SP₂ Required Power kW₂ Required Fan Speed N₂

Reference / Existing Operating Condition

Air Flow Q₁ (m³/sec)

Static Pressure SP₁ (mmWC)

Power Consumption kW₁ (kW)

Fan Speed N₁ (RPM)

New / Required Operating Condition

Air Flow Q₂ (m³/sec)

Static Pressure SP₂ (mmWC)

Power Consumption kW₂ (kW)

Fan Speed N₂ (RPM)

Calculated Result

Enter values and click Calculate

This calculator is based on centrifugal fan affinity laws. Select the unknown value and enter all remaining required values. The calculator will automatically calculate the selected unknown value.

```

Air compressor air leakage percentage and quantity calculator

```html

Air Compressor Air Leakage Calculator

www.powerplantandcalculations.com

Compressor Capacity (m³/min)

Loading Pressure (kg/cm²)

Unloading Pressure (kg/cm²)

Loading Power Consumption (kW)

Unloading Power Consumption (kW)

Average Loading Time (minutes)

Average Unloading Time (minutes)

Air Leakage Percentage 0.00 %

Air Leakage Quantity 0.000 m³/min

Specific Power Consumption 0.0000 kWh/m³

Energy Loss Due to Air Leakage 0.000 kW

```

Belt Conveyor Speed Calculator

Calculate Belt Conveyor Speed in m/sec

Motor Speed (RPM)

Gear Box Reduction Ratio

Head Pulley Diameter (mm)

Calculation Result

Head Pulley Speed

0 RPM

Belt Conveyor Speed

0 m/sec

Belt Conveyor Speed

0 m/min

www.powerplantandcalculations.com

Cogeneration Turbine Heat rate Calculator

 

Cogen turbine heat rate is the amount of heat energy required by a cogeneration system to generate one unit of electrical energy. It is generally expressed in kcal/kWh or kJ/kWh. A lower heat rate indicates better energy efficiency, meaning less heat energy is required to generate each unit of electricity.

What are the Inputs required for the Calculation of Cogen Turbine Heat rate calculation?

• Turbine inlet steam flow in TPH
• Turbine inlet steam pressure and temperature
• Bleed steam flow
• Bleed steam pressure and temperature
• Extraction steam flow
• Extraction steam pressure and Temperature
• Exhaust steam flow
• Exhaust steam pressure

Co-gen-THR =((Turbine inlet steam flow X its Enthalpy)-(Process steam flow X Enthalpy Exhaust steam flow X Enthalpy)) / Power generation

Steam Turbine Co-generation Heat Rate Calculator

Calculate Turbine Heat Rate using Inlet, Extraction / Bleed and Exhaust Steam Conditions

1. Turbine Inlet Steam Conditions

Inlet Steam Flow (TPH)

Inlet Pressure (kg/cm²)

Inlet Temperature (°C)

2. Process Steam / Extraction / Bleed Conditions

3. Turbine Exhaust Steam Conditions

Exhaust Steam Flow (TPH)

Exhaust Pressure (kg/cm²)

Exhaust Temperature (°C) - Reference Only

4. Turbine Power Generation

Power Generation (MW)

Calculation Results

Inlet Steam Enthalpy

0 kcal/kg

Inlet Heat Energy

0 kcal/hr

Total Extraction / Process Heat

0 kcal/hr

Exhaust Liquid Enthalpy (hf)

0 kcal/kg

Exhaust Heat

0 kcal/hr

Net Heat for Power Generation

0 kcal/hr

Co-generation Heat Rate

0 kcal/kWh

Co-generation Heat Rate

0 kJ/kWh

Specific Heat Input

0 kJ/kg inlet steam

Formula Used:
Co-gen THR = [(Turbine Inlet Steam Flow × Inlet Enthalpy) − Σ(Process / Extraction Steam Flow × Extraction Enthalpy) − (Turbine Exhaust Flow × Liquid Enthalpy at Exhaust Pressure)] ÷ Power Generation

Important: Exhaust enthalpy is considered as saturated liquid enthalpy (hf) based on exhaust pressure. Exhaust temperature is not used for exhaust enthalpy calculation.

Note: Steam enthalpy is estimated internally from pressure and temperature using an engineering approximation. This is suitable for indicative online calculations. For guaranteed turbine heat-rate calculations, validated steam tables or IAPWS-IF97 properties should be used.

boilerandturbinehub.com